5 Shams and Scams You Should Be Leery of as a Homebuyer or Seller
At this point everyone knows not to fall for the email from a Nigerian prince promising to share his fortune with you if you just
This DIY ‘Dr. Who’ Themed Murphy Bed Will Let You Turn Any Room Into A Guest Room
If there’s one thing most people could use more of in their homes, it’s room. This is especially true in the bedroom. How many times have you wanted to do yoga (or maybe play the drinking game version of twister) but there just wasn’t enough room due to the bed and likely numerous chests of drawers and piles of laundry? No? Just me?
Well, whether you get all bizarre in your bedroom or not, imagine if your bed only took up room whenever you needed sleep. Pretty cool idea, yeah? That’s what Murphy beds are! A bed that you fold up into a cabinet during waking hours, and pull out when it’s time to drift off for the night.
Which brings us to the Murphy Bed below. The owner, Stubbs, designed it to look like space faring vehicle from the Dr. Who series, the Tardis! With this, your room will not only get “bigger on the inside” (fans of the series will understand), but you can travel your dream world in style.
Below is the condensed version of the DIY. Find the complete version here.
Here’s the before photo for the guest bedroom, before being converted into a sleep-portal to take you beyond space & time.
First step: order a kit.
Stubbs ordered the lighted kit so she wouldn’t need to add a night stand. Once it arrived, the frame was assembled. According to Stubbs, the measurements of the wood are confusing to most hardware/lumber store specialists (sounds like a Timelord problem alright).
Via The Stubby Thumb
Stubbs apparently had to make a second run for wood because of mismeasured cutting done originally.
I’m starting to suspect the Daleks were involved in hardware store shenanigans that week.
Via The Stubby Thumb
Finally, the finished bedframe.
Via The Stubby Thumb
Next, the side rails are attached.
After that, the backing is installed.
Next comes the painting. First, primer is applied, then designs were discussed (and re-discussed) with a friend to figure out the next step.
Via The Stubby Thumb
Ultimately, realizing this bed would not have the same dimensions as the actual Tardis (pun intended for you fans out there), she opted to use trim to create her own design modification.
Tada!
The next phase of painting begins.
Any imperfections are corrected with wood filler. It might take some resanding and repainting, but what is a Tardis without a few resurrections?
Via The Stubby Thumb
Next, is assembling the cabinet. A hole saw is used to cut necessary placements for the lights.
And a jigsaw is helpful for cutting the… “dados?”
According to the dictionary, it’s a rectangular channel cut across the grain of a board. In this case, within the edge of the board.
Via The Stubby Thumb
After the cabinet is painted to match the theme, it’s time to piece everything together.
Of course, four legged quality-control managers can help keep you motivated.
Via The Stubby Thumb
With the help of some friends and neighbors, Stubbs completed her project.
As The Doctor would say… time to close your eyes and save some time, and space!
“Allons-y!”
